Wood pellets
Sawdust, chips, forestry waste and clean wood residues.
NovaGen Turnkey Biomass Systems
Biomass Pellet Plants
Complete wood and agricultural biomass pellet production lines from chipping and drying to pelletizing, cooling, screening and packing.
Get configuration & price →
Balance every stage
A pellet mill cannot correct poor preparation.
Stable pellets depend on consistent particle size, moisture and feed rate. We check the whole route before selecting equipment.
Discuss your material →Where this machine
is commonly used.
NovaGen designs complete pellet lines around feedstock behavior and finished pellet requirements. Each stage is balanced so the pellet mill receives consistent particle size, moisture and flow for stable production.
Agri pellets
Rice husk, straw, bagasse and selected crop residues.
Industrial fuel
Dense biomass fuel for boilers and process heat.
Animal bedding
Purpose-made pellets from clean suitable fibre.
How it fits into the line
A practical route from
feed to finished output.
01
Prepare
Chip and remove unsuitable contamination.
02
Dry
Condition material to workable moisture.
03
Mill
Grind to consistent particle size.
04
Pelletize
Compress conditioned feed through ring dies.
05
Finish
Cool, screen, store and pack pellets.
Typical configuration
What the system can include
- Wood chipper and hammer mill
- Rotary dryer and dust control
- Ring-die pellet mills
- Counterflow cooler and screener
- Silos, conveyors and packing system
- Central PLC and electrical control
| Selection factor | What we need | Why it matters |
|---|---|---|
| Raw material | Species, ash, fibre and contamination | Determines process and die design |
| Moisture | Inlet and seasonal variation | Determines dryer duty |
| Pellet standard | Diameter, durability and end use | Determines conditioning and die |
| Automation | Labor and operating model | Determines controls and storage |
Questions buyers usually ask
Worth checking
before you order.
What moisture is needed for pelletizing?
The correct range depends on material and machine design; it is established during process engineering and commissioning.
Can one line process different biomass?
Some variation can be accommodated, but major changes in fibre, ash or bulk density may require separate settings, dies or preparation equipment.
Do you supply packing equipment?
Yes. Cooling, screening, storage and bagging or bulk-loading equipment can be included in the line.